• Gobo-wheel with 6 rotating gobos plus open
• All gobos can be interchanged
• With gobo-shake function
• Lightbeam with 19° radiation angle
• Exact positioning via 16 bit Pan/Tilt movement resolution
• Motorized focus
• Strobe effect with 1-10 flashes per second
• Mechanic dimmer
• Positioning within 540° Pan and 265° Tilt
• DMX-controlled operation or stand alone operation with Master/Slave-function
• 48 preprogrammed scenes in Program Run for stand alone operation
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
• 8 built-in programs can be called up via DMX-controller
• Sound-controlled via built-in microphone
• Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-Reverse, Program, Reset, lamp on/off
• For bright 150 W discharge lamp
• DMX-control via every standard DMX-controller

Power supply:	230 V AC, 50 Hz ~
Power consumption:	285 W
DMX-control-channels:	11
DMX-512-connection:	3-pin XLR
Flash-rate:	10 Hz
Rotating gobo-wheel:	6 gobos and open
Outside diameter of the gobos:	27 mm
Image diameter of the gobos:	23 mm
Length of base:	330 mm
Width of yoke:	320 mm
Height (head horizontal):	485 mm
Weight (net):	13 kg