• DMX-controlled operation or stand alone operation with Master/Slave-function
• 48 preprogrammed scenes in Program Run for stand alone operation
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
• 8 built-in programs can be called up via DMX-controller
• Sound-controlled via built-in microphone
• 9 brilliant, dichroic colors plus white
• Switchable color change (mode 1: only full colors, mode 2: color-change at every position)
• Rainbow effect with adjustable speed in both directions
• Gobo-wheel with 7 rotating gobos plus open
• With gobo-shake function
• Manual focus
• Strobe effect with 1-10 flashes per second
• Mechanic dimmer
• Positioning within 360° Pan and 265° Tilt
• Lightbeam with 13° radiation angle
• Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-Reverse, Program, Reset, lamp on/off
• For MSD/HSD 250 or MSD 250/2 lamp
• DMX-control via every standard DMX-controller

Power supply:	230 V AC, 50 Hz ~
Power consumption:	400 W
DMX-control-channels:	8
DMX-512-connection:	3-pin XLR
Flash-rate:	10 Hz
Colour-wheel:	9 dichroic filters and open
Rotating gobo-wheel:	7 gobos and open
Outside diameter of the gobos:	25 mm
Image diameter of the gobos:	20 mm
Maximum PAN-movement 360°:	in 2.0 s
Maximum TILT-movement 265°:	in 1.5 s
Length of base:	380 mm
Width of yoke:	330 mm
Height (head horizontal):	450 mm
Weight (net):	15 kg