• 2 x 65 W/4 ohm
• Enormous power with highest brilliance
• 2 gain controls on the front panel
• All operation modes controllable via LEDs
• LED intensity adjustable via brightness control on the rear panel
• Signal inputs via XLR female or 1/4" jack socket
• Input sensitivity adjustable via selector on the rear panel
• Speaker connection via lockable Speaker plugs or Banana/screw combination
• With limiter
• Ground Lift switch against humming
• Bridged switch for bridging
• Many protection circuits for optimized equipment protection
• Very rugged housing
• 19" dimensions
• High power/weight relation

Power supply:	115/230 V AC, 50/60 Hz ~
Power-range:	230 V ± 10 % (206 V - 253 V)
Power consumption (max.):	250 W
Momentary music peak power at 1 KHz:	200 W / 4 Ohms
Maximum power output:	2 x 70 W / 4 Ohms
Nominal power output:	2 x 65 W / 4 Ohms
Power output sine:
Stereo 4 Ohm	2 x 65 W
Stereo 8 Ohm	2 x 40 W
8 Ohms bridged	1 x 125 W
Frequency range:	22 - 31 000 Hz
Damping-factor:	> 150
Distortion factor:	0,01 %
Signal to Noise Ratio:	108 dB
Channel seperation (at 1 KHz):	89 dB
Min. input sensitivity:	0,77 V/26 dB/1,44 V
Input impedance:	12 kOhms (unbalanced), 22 kOhms (balanced)
Output impedance:	> 0,02 Ohms
Slew-rate:	> 35 V/µsec
Input-connectors:	2 x XLR-female-plug, 2 x 1/4"-jack-plug
Output-connectors:	2 x Speaker (stereo), 1 x Speaker (bridge), 2 x Banana/screw combination
Control elements:	Power switch, input attenuators (one per channel), Mode switch - Stereo/Parallel/Bridged, Ground Lift, Input-Level-Select (0.77 V/26 dB/1.44 V), limiter
LED indicators (per channel):	Power, Protect, Signal, Mode
Protection circuits:	Short-circuit, DC-protection-circuit, Thermal protection-circuit, Softstart
Construction:	Steel chassis, aluminium frontpanel
Dimensions:	325 x 482 x 54 mm
Minimum mounting depth:	345 mm
Weight:	5.4 kg